John Milbery

结果 1-6(共 6)
< 上一页1下一页 >
每页的结果:
分排方式:
厂商
Samchully
说明
This Samchully Chuck is designed to be used with SOLIDWORKS CAM Professional for Turning. With a turning part active in SOLIDWORKS CAM, you can define the Chuck and the Jaws by specifying this assembly model. It has Configurations that represent the different gripping diameters on the part.
类别
提供人
公司
Dassauly Sytemes
配置?
下载
557
添加于
2 5月, 2018
厂商
Samchully
说明
his Samchully Chuck is designed to be used with SOLIDWORKS CAM Professional for Turning. With a turning part active in SOLIDWORKS CAM, you can define the Chuck and the Jaws by specifying this assembly model. It has Configurations that represent the different gripping diameters on the part.
类别
提供人
公司
Dassauly Sytemes
配置?
下载
207
添加于
1 5月, 2018
厂商
Samchully
说明
This Samchully Chuck is designed to be used with SOLIDWORKS CAM Professional for Turning. With a turning part active in SOLIDWORKS CAM, you can define the Chuck and the Jaws by specifying this assembly model. It has Configurations that represent the different gripping diameters on the outside diameter of the part.The hard jaws are inverted allowing larger diameter parts to be gripped.
类别
提供人
公司
Dassauly Sytemes
配置?
下载
135
添加于
1 5月, 2018
厂商
Samchully
说明
This Samchully Chuck is designed to be used with SOLIDWORKS CAM Professional for Turning. With a turning part active in SOLIDWORKS CAM, you can define the Chuck and the Jaws by specifying this assembly model. It has Configurations that represent the different gripping diameters on the part.
类别
提供人
公司
Dassauly Sytemes
配置?
下载
615
添加于
1 5月, 2018
厂商
Samchully
说明
This Samchully Chuck is designed to be used with SOLIDWORKS CAM Professional for Turning. With a turning part active in SOLIDWORKS CAM, you can define the Chuck and the Jaws by specifying this assembly model. It has Configurations that represent the different gripping diameters on the inside diameter of the part.
类别
提供人
公司
Dassauly Sytemes
配置?
下载
121
添加于
1 5月, 2018
厂商
Samchully
说明
This Samchully Chuck is designed to be used with SOLIDWORKS CAM Professional for Turning. With a turning part active in SOLIDWORKS CAM, you can define the Chuck and the Jaws by specifying this assembly model. It has Configurations that represent the different gripping diameters on the part.
类别
提供人
公司
Dassauly Sytemes
配置?
下载
716
添加于
1 5月, 2018