修改于:
八月 12,2015
评级:
下载:
40
替代版本:
供应商模型说明:
217-4017
名称: 500 ThunderHex Stock (3 feet) 说明: ThunderHex Stock & Bearings will revolutionize the ways teams use hex shaft. ThunderHex Stock works in all applications where 1/2" Hex Shaft will work and also includes rounded corners. These rounded corners allow the shaft to pilot inside a 13.75 mm round (ThunderHex) Bearing instead of a standard 1/2" Hex Bearing. This eliminates some difficult manufacturing tolerances and results in a MUCH smoother end result. Simply put, ThunderHex Bearings are the best way to create smooth-running hex shafts, and ThunderHex Stock helps you accomplish this without a lathe. Also, since you're essentially putting a round peg in a round hole, no more struggling to align the hex of your shaft with the hex hole of your bearing. All ThunderHex Stock also includes a subtle but very useful feature: a 0.201" hole through the center. This hole provides a clearance fit for a #10 bolt or can be tapped for 1/4-20 bolts. This means that you no longer need a precision lathe to create custom-length, high-strength standoffs; simply cut the ThunderHex shaft to size and tap it with a 1/4-20 (or 1/4-28) thread.
配置及下载
评定与评论 (0)
标记 (0)
替代版本
更改下面的选项，自定义要下载的模型。单击“更新预览”按钮将您的更改应用到查看器。
查看:
四视图
多视图
前视
评级最高
右视
后视
下视
左视
等轴测
左右二等角轴测
上下二等角轴测
当前会话超时。请按“确定”以重新加载页面并重试。
下载...
模型已经可供下载。<br/>将该链接拖放到 SOLIDWORKS，或单击该链接以下载文件。
（需要登录）
VEX Robotics
VEX Robotics 1519 Interstate 30 West Greenville , Texas , 75402 United States
该供应商的所有产品