修改于:
二月 03,2019
评级:
下载:
597
替代版本:
供应商零件编号:
HS Code:854790100
名称: Mil-C-83513 Connectors 说明: APPLICATIONS
Medical Equipment
Satellites
Robotics
Bar Code Scanners
Hand Held Test Equipment
Missiles
Geophysical Equipment
Commercial Avionics
Navigation Systems
FEATURES
High-Strength, Light-Weight Aluminum Shells
These connectors use aircraft/space grade aluminum shells that are capable of withstanding the rigors of space, including ballistic launching into space and the environmental extremes of space.
Extremely Small Interconnect
Micro-D connectors are designed with contacts on. 050" (1.27) centers and size 24 contacts, providing ultra-high density connectors in half the space typically needed for standard D-Subminiature connectors. These connectors are typically used where small space and lightweight are of primary concern.
Unique Twist Pin and Solid Tube Socket
Micro-D' s use ITT Industries twist pins that are constructed by welding seven wires together to form a strong rounded tip. Then, slightly twist the wires to form a birdcage before crimping them into the body of the pin contact. Micro-D' s differ from standard D-Subminiature connectors in that the pin contacts are protectively housed in the insulator and the solid tube socket contacts are visibly extended from the socket insulator. This unique design protects the twist pin from damage. The pin contact bird cage gets compressed, elongates and twists inside the smaller diameter of the solid tube socket providing excellent wiping action and extremely low contact bounce, even under high vibration.
Total Environmental-Sealing Silicone Interfacial Seals and Epoxy-Potted Contacts
The silicone interfacial seal prevents the entrance of environmental contaminants, humidity and moisture from entering the contact area when mated. The wire side of the connectors are potted with high quality epoxy that encapsulates the wire side of the connector and locks the contacts into the insulator, preventing any contact pullout.
Pre-wired Connectors for Fast, Easy Assembly
Micro-D connectors are available
配置及下载
评定与评论 (1)
标记 (0)
替代版本
更改下面的选项，自定义要下载的模型。单击“更新预览”按钮将您的更改应用到查看器。
查看:
四视图
多视图
前视
评级最高
右视
后视
下视
左视
等轴测
左右二等角轴测
上下二等角轴测
当前会话超时。请按“确定”以重新加载页面并重试。
下载...
模型已经可供下载。<br/>将该链接拖放到 SOLIDWORKS，或单击该链接以下载文件。
（需要登录）