Macro to measure length of all the segments in the selected sketch of the active model file and add total length as custom property with value in inches or mm (up to 2 decimal places). The macro will check the model units and accordingly will convert the total length into inches or mm.

Macro to measure length of all the segments in the selected sketch of the active model file and add total length as custom property with value in inches (up to 2 decimal places).

A keyboard shortcut for convert entities that selects only the inner loops

This macro will traverse the part feature tree and fully define any sketch that is under-defined

Opens a sketch on the front plane and creates a Center Rectangle with a midpoint relation on the base line to the origin. Prompts for width height dimension input. A prompt box will open to give the the option to extrude the rectangle. Works in Inch or Metric mode.

Creates a point at the centre of gravity for the part/ assembly

Draws Rectangle Centered about the Origin on a preselected Face or Plane

While in a sketch, run this macro to draw 4 mirrored points. You will be prompted for the horizontal dimension.

Draws a centered rectangle on the front plane and prompts for dimensions. You do not have to be in a sketch to run this macro.

Edits the driving sketch of several features that don't support the Right-click>Edit Sketch workflow, including Hole Wizard and pattern features. View will be oriented normal to the sketch plane. If macro is activated while editing a sketch with nothing selected, it will orient normal to the sketch plane again. If already normal, the sketch is saved and exited.