Dayton

Dayton

DC gearmotor

Ming's Parametric GEAR

N/A

With this model you can generate ANY Pin Hub Spur Gear model.Go to the Configuration Tree, right click on the table icon and select "Edit Table", change the value for each parameter: N_Teeth, Pd, Pres. Angle, Face Width, Hub Diam., Hub Proj., Bore Diam., Set Srew Diam.Then just click anywhere outside the table and the model will re-generate with your input values. Note: only use values that are physically posible, otherwise you will get errors.

n/a

Includes a Design Table for Customizing different Properties. Based off of this part: http://3dcontentcentral.com/3DContentCentral/Download-Model.aspx?catalogid=171&id=13217#0, with an added hex bore and removal of the hub.

40 Tooth 20 Pitch Gear

AndyMark

未提供任何内容

AndyMark

未提供任何内容

AndyMark

未提供任何内容

AndyMark

未提供任何内容

35 Tooth 20 Pitch Medium Cluster Gear

AndyMark

未提供任何内容

Ming's Parametric GEAR

N/A

With this model you can generate ANY Pin Hub Spur Gear model. Go to the Configuration Tree, right click on the table icon and select "Edit Table", change the value for each parameter: N_Teeth, Pd, Pres. Angle, Face Width, Hub Diam., Hub Proj., Bore Diam., Set Srew Diam. Then just click anywhere outside the table and the model will re-generate with your input values. Note: only use values that are physically posible, otherwise you will get errors.

SPROCKET

BROWNING

40 PITCH X 42 TEETH X 3/4" BORE