With this part you can create ANY UNS Threaded Screw (or custom made). Just edit equations for values (in inch) of D_major_dia, N_threads_per_inch, and Clearance. I did not make a Design Table due to the feedbacks from my Ming's Gear Template part, so if you need to figure out what values to input for specific UNS treads, you may search in internet and there are many sources that provide this information. The base model has values input for a 1/4-20 UNC-2B. I use this model to create fixture with threads and send them to 3D rapid prototyping. Note: for 3D Rapid Prototyping you may want to increase Clearance to account for 3D fabrication capabilities.

Mcgregor Manufacturing

304 stainless threaded insert for G-10/F4 material non glue

American National Standard Institute

Corrected on 10-07-2011 M.Meyer -See Design BinderThumb screw having a flattened head design for turning without a driver or wrench. Available in 2 types “A” and “B”, Type “A” having a shoulder under the head and manufactured in Regular and Heavy series, Type “B” are screws manufactured without a shoulder under the head and are available in Regular and Heavy series. *This model has all 5 Alternate point configurations per ANSI B18.17-1968(R1975) Table 8.Material: Forged one piece screws having a shoulder under the head and are available in two series, Regular and Heavy. Can be manufactured from a variety of metals such as Carbon Steels, Brass, Copper and Zinc Alloys.

American National Standard Institute

Thumb screw having a flattened head design for turning without a driver or wrench. Type “A” having a shoulder under the head and manufactured in Heavy series. -This model has all 5 Alternate point configurations per ANSI B18.17-1968(R1975) Table 8.Material: Forged one piece screws having a shoulder under the head and are available in two series, Regular and Heavy. Can be manufactured from a variety of metals such as Carbon Steels, Brass, Copper and Zinc Alloys.-Please read Design Binder for more detail and how to add length and configuration naming to the Design Table.

American National Standard Institute

Thumb screw having a flattened head design for turning without a driver or wrench. Available in 2 types “A” and “B”, Type “A” having a shoulder under the head and manufactured in Regular and Heavy series, Type “B” are screws manufactured without a shoulder under the head and are available in Regular and Heavy series. -This model is Type A Regular and has all 5 Alternate point configurations per ANSI B18.17-1968(R1975) Table 8.Material: Forged one piece screws having a shoulder under the head and are available in two series, Regular and Heavy. Can be manufactured from a variety of metals such as Carbon Steels, Brass, Copper and Zinc Alloys. -READ DESIGN JOURNAL for more detail and adding configurations for length.

未提供任何内容

Hex cap screw for holes too close to the edge.

未提供任何内容

未提供任何内容

SK-ISK DIN-7991-M5 Verschiedene Längen