修改于:
一月 20,2025
评级:
下载:
236
替代版本:
供应商零件编号:
ZT001
名称: LM2596 DC-DC Buck Converter Step Down Module Power Supply DIP Output 1.25V-30V 3A 说明: Electrical Parameters:Input: DC 3.2V to 35V (input voltage must be more than the output voltage can not be higher than boost 1.25v.)Output: 1.25V to 30V DC voltage is continuously adjustable, high efficiency and maximum output current of 3A.Features: All solid capacitors using SANYO, 36u thick circuit boards, high-Q inductors with high power output LED indicatorSize: 45 21 13mm / 1.69 0.83 0.51inch (including potentiometers)minimum with locating hole with LED indicator DC-DCInstructions:Access to power (3-35V), adjust the blue potentiometer knob (clockwise rotation generally boost, buck counterclockwise rotation) and with a multimeter to monitor the output voltage reaches the required voltage.Wiring:1. welding, welded directly to the power line input (output) port;2. solder pins, or pins can be inserted through the lead insertion use in tunnel plate; soldered directly to the PCB after another or add pins.Note: The input and output can not be reversed, reverse might burn chips;This is a step-down module, the input voltage is higher than the required output voltage;Output 2A or less long period of time without additional heat sink output current is greater than 2.5A (or output power greater than 10W) to work long hours please add heat sink.Package Included: 10pcs X LM2596S Module
配置及下载
评定与评论 (1)
标记 (0)
替代版本
更改下面的选项，自定义要下载的模型。单击“更新预览”按钮将您的更改应用到查看器。
查看:
四视图
多视图
前视
评级最高
右视
后视
下视
左视
等轴测
左右二等角轴测
上下二等角轴测
当前会话超时。请按“确定”以重新加载页面并重试。
下载...
模型已经可供下载。<br/>将该链接拖放到 SOLIDWORKS，或单击该链接以下载文件。
（需要登录）