THANKS VERY MUCH you have saved me hours of first - 1) trying to understand tech specs of KEMET and then 2) modeling into SolidEdge..
Leads are spaced properly, but shifted - pin 1 edge is 1.05mm from body edge, should be 1.05mm from the center of the lead.
It''s an accurate model of a relay that is in reality nothing but a box with some legs. Not sure what the previous comment was expecting.
It could be a little more detailed. In its current incarnation it''s just a box with legs.
请选取您想标为不妥当的标签。