Stock standard: Sch 10S size DN 15 -DN100 and DN 150 in grade
316, EN 1,4462 (2205) and DN25 - DN100 EN 1,4547 (254 SMO).

Finished: Pickled

SolidComponents^TM

*Pressure ratings can be done if tube dimension connected to the branch is known.

Finish: Pickled

Note! Regarding steel grade you have to delete not desired steel grade in your drawing part list.

SolidComponents^TM

The pressures are calculated for grade EN 1.4307 at 20°C according to EN 10253 Type A.
Produced according to EN 10253-3
All dimensions can with additional testing be upgraded to meet EN 10253-4 Type A. This has to be confirmed when ordering.

Note! Regarding steel grade you have to delete not desired steel grade in your drawing part list.

Finish: Pickled

SolidComponents^TM

*)ISO-dimensions OT-No:300.
**) Are produced according to EN 10253-4 Type A.
The pressure ratings are calculated for grade EN 1.4307 at 20°C according to
EN 10253 Type A.
Finish: Pickled

All dimensions can with additional testing be upgraded to meet EN 10253-4 Type A. This has to be confirmed when ordering.
Note! Regarding steel grade you have to delete not desired steel grade in your drawing part list.

SolidComponents^TM

The pressures are calculated for grade EN 1.4307 at 20°C according to EN 10253 Type A.
Produced acc. to EN 10253-3
All dimensions can with additional testing be upgraded to meet EN 10253-4 Type A. This has to be confirmed when ordering.


Note! Regarding steel grade you have to delete not desired steel grade in your drawing part list.

Finish: Pickled

SolidComponents^TM

*Pressure ratings can be done if tube dimension connected to the branch is known.


Note! Regarding steel grade you have to delete not desired steel grade in your drawing part list.

SolidComponents^TM

ISO
The pressures are calculated for grade EN 1.4307 at 20°C according to EN 10253 Type A.
Produced according to EN 10253-3, with additional testing they can meet EN 10253-4 Type A.  
Finish: Pickled

Fabricated on request
Note! Regarding steel grade you have to delete not desired steel grade in your drawing part list.

SolidComponents^TM

ISO
*) Are produced according to EN 10253-4 Type A. 
The pressure ratings are calculated for grade EN 1.4307 at 20°C according to
EN 10253 Type A.
Finish: Pickled

All dimensions can with additional testing be upgraded to meet EN 10253-4 Type A. This has to be confirmed when ordering.
Note! Regarding steel grade you have to delete not desired steel grade in your drawing part list.

SolidComponents^TM