REV Robotics

模型位于REV Robotics CatalogMotion
结果 41-50(共 120)
每页的结果:
零件号
厂商
说明
The 5mm Hex to 8mm Round Bearing Insert, when paired with the 8mm x 12mm x 3.5mm Flanged Bearing (REV-49-1559), allows you to support 5mm hex shaft with a robust low friction bearing. It includes a pair of locking tabs that secure the insert to the bearing.
类别
配置?
下载
29
添加于
29 6月, 2020
零件号
厂商
说明
This bearing pillow block bracket is used with the REV 15mm Extrusion System. The hex center hole fits REV Robotics 5mm hex shaft.
类别
配置?
下载
81
添加于
24 12月, 2019
零件号
厂商
说明
This bearing pillow block bracket is used with the REV 15mm Extrusion System. The 9mm center hole is use with either the REV Robotics Long Through-bore Bearing (REV-41-1329) or the End Cap Bearing (REV-41-1322) to provide a low friction shaft support.
类别
配置?
下载
109
添加于
24 12月, 2019
零件号
厂商
说明
The long through-bore bearings are used with the 5mm hex shaft recommend for the REV 15mm Extrusion System to provide a low friction rotating shaft support.
类别
配置?
下载
95
添加于
24 12月, 2019
零件号
厂商
说明
The short through-bore bearings are used with the 5mm hex shaft recommend for the REV 15mm Extrusion System to provide a low friction rotating shaft support.
类别
配置?
下载
83
添加于
24 12月, 2019
零件号
厂商
说明
The REV End Cap Bearing is used with the 5mm hex shaft recommended for the REV 15mm Extrusion System to provide a low friction rotating shaft support.
类别
配置?
下载
29
添加于
24 12月, 2019
零件号
厂商
说明
Omni wheels have rollers mounted around the outside which passively rotate at 90 degrees to the powered direction of the wheel. Omni wheels can be used to make is easier to turn with skid steer robots or can be used to make more advanced robot drive trains like kiwi drive.
类别
配置?
下载
208
添加于
24 12月, 2019
零件号
厂商
说明
Omni wheels have rollers mounted around the outside which passively rotate at 90 degrees to the powered direction of the wheel. Omni wheels can be used to make is easier to turn with skid steer robots or can be used to make more advanced robot drive trains like kiwi drive.
类别
配置?
下载
167
添加于
24 12月, 2019
零件号
厂商
说明
REV Grip Wheels are wider than our standard wheels, giving teams more traction while still being lightweight and robust. This wheel is compatible with 5mm hex shaft, which completely eliminates the need for expensive hubs or using potentially unreliable set screws.
类别
配置?
下载
136
添加于
24 12月, 2019
零件号
厂商
说明
The REV Robotics 90mm Traction Wheel which fits on a 5mm hex shaft is primarily intended for use with the REV 15mm Extrusion System.
类别
配置?
下载
86
添加于
24 12月, 2019

关于

Robotics parts supplier dedicated to helping promote STEAM globally. Proud supplier of FIRST Global, FIRST Tech Challenge, and FIRST Robotics Competition.

联系人细节

地址:
1621 W Crosby Rd
Suite 104
Carrollton, 75006
Texas, United States
电话: 8442552267
电子邮件:
网站: www.revrobotics.com