Aluminum Structural Framing for Larger Robots. 72" Long Pieces. 1/8" Thick Aluminum. Pre-drilled with 1/4" holes. Two gusset options. Discontinued. We recommend the VersaFrame system as a replacement option.

Aluminum Structural Framing for Larger Robots. 72" Long Pieces. 1/8" Thick Aluminum. Pre-drilled with 1/4" holes. Two gusset options. Discontinued. We recommend the VersaFrame system as a replacement option.

Spike is a 20 Amp, H-Bridge Relay Module that is small enough to be remotely mounted almost anywhere on your robot. Spike is designed for driving small motors in forward, reverse, or stop (brake). Spike is opto-isolated at the signal input to protect the Robot Controller against motor noise and return currents. Requires a 3-wire cable for connection to the Robot Controller. Ideal for 2 independent solenoids, light, pumps. Design will accept auto-resetting circuit breaker. Compact design.

Useful for spacing out items axially. They come in black. We think they're pretty cool, but they're really not very exciting. Fits 3/8" VEXpro Hex Shafts.

VEXpro offers all the bearings most commonly used by FRC teams, and also replacement bearings for all the "odd sized" bearing used in VEXpro gearboxes.

VEXpro offers all the bearings most commonly used by FRC teams, and also replacement bearings for all the "odd sized" bearing used in VEXpro gearboxes.

VEXpro offers all the bearings most commonly used by FRC teams, and also replacement bearings for all the "odd sized" bearing used in VEXpro gearboxes.

ThunderHex Stock & Bearings will revolutionize the ways teams use hex shaft. ThunderHex Stock works in all applications where 1/2" Hex Shaft will work and also includes rounded corners. These rounded corners allow the shaft to pilot inside a 13.75 mm round (ThunderHex) Bearing instead of a standard 1/2" Hex Bearing. This eliminates some difficult manufacturing tolerances and results in a MUCH smoother end result. Simply put, ThunderHex Bearings are the best way to create smooth-running hex shafts, and ThunderHex Stock helps you accomplish this without a lathe. Also, since you're essentially putting a round peg in a round hole, no more struggling to align the hex of your shaft with the hex hole of your bearing. All ThunderHex Stock also includes a subtle but very useful feature: a 0.201" hole through the center. This hole provides a clearance fit for a #10 bolt or can be tapped for 1/4-20 bolts. This means that you no longer need a precision lathe to create custom-length, high-strength standoffs; simply cut the ThunderHex shaft to size and tap it with a 1/4-20 (or 1/4-28) thread.

VEXpro offers all the bearings most commonly used by FRC teams, and also replacement bearings for all the "odd sized" bearing used in VEXpro gearboxes.

This is our 1/2" OD 6061-T6 Round Tube Axle Stock. VEXpro offers several different lightweight shaft stock options made from both 6061 aluminum (for tube axles) and 7075 T6 Aluminum (for high-strength hex shafts handling torsional loads). These shaft lengths are correctly toleranced such that they fit perfectly through bearings and hubs, without extra work; that's right, no more filing down your shafts before you can use them. While it's tough to get excited about a few pieces of shaft stock, these shafts are specifically created to reduce user frustration. Do yourself a favor, buy some of the good stuff. 7075-T6 Aluminum (3/8" & 1/2" Hex). 6061-T6 Aluminum (1/2" Tube). Black Anodized. 18" or 3' lengths.